▎ 摘　　要

NOVELTY - The lamp has a mounting box (1) that is formed with a mounting cavity. The mounting cavity is clamped with multiple LED lamp strips through a clamping structure. A bottom portion of the mounting box is hinged with a cover plate (2). A top portion of a radiating box (14) is provided with multiple air outlet holes that are formed with multiple cooling fans (13) for radiating. Two sides of a heat dissipation box far away from a cooling structure are equipped with the cooling fans. The radiating tank is formed with several air guide sheets. A mounting cylinder (15) is installed on a top part surface of the heat dissipation box. The installation cylinder is set to clamp and install on a fastening disk (22) through a fastening structure (16). USE - LED lamp for use as electroluminescent semiconductor material chip using silver glue or white glue to solidify on bracket. ADVANTAGE - The LED lamp with graphene heat conducting layer can generate a lot of heat for collecting the lamp strip when working, convenient for the blowing cooling process. Several air guide sheets are staggered and are wavy to ensure that each area in the radiating box can receive good cooling treatment to ensure the radiator effect when the air flow flows. The lamp strip is convenient to quickly disassemble and maintain after damage through the clamping structure, the pushing plate, the matching guide rod, and the ejection spring. The light emitting diode lamp has reasonable design, improves the whole radiating effect of the LED lamp, and improves the service life of the lamp. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic view of the LED lamp. Mounting box (1) Cover plate (2) Cooling fan (13) Radiating box (14) Mounting cylinder (15) Fastening structure (16) Fastening disk (22)