▎ 摘 要
NOVELTY - Graphene oxide thermal radiation coating comprises components A and B at weight ratio of 4:1. Component A comprises 30-60 wt.% aqueous silicone resin, 2-5 wt.% graphite, 1-3 wt.% binder, 1-2 wt.% aqueous delusterant, 0.5-1.5 wt.% defoamer, 1-2 wt.% adhesion accelerant, and 30-60 wt.% solvent. Component B comprises 20-30 wt.% aqueous curing agent and 70-80 wt.% ethanol. USE - Graphene oxide thermal radiation coating. ADVANTAGE - The graphene oxide thermal radiation coating uses high thermal conductivity and emissivity graphene as heat medium, and uniformly disperses it in resin and solvent to prepare coating capable of increasing radiating area on surface radiating device, thus improving radiating effect. It is highly efficient, convenient, and environment friendly. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is included for preparation of graphene oxide thermal radiation coating by weighing aqueous silicone resin and solvent; putting them into ball milling pot; adding graphene oxide; stirring for 30 minutes; respectively adding dispersant, aqueous delusterant, aqueous defoamer, and adhesion accelerant; stirring for 1000 revolutions per minute for 4 hours to obtain component A; weighing and putting aqueous curing agent and ethanol in sealed container; stirring them uniformly to obtain component B; and mixing components A and B at weight ratio of 4:1.