▎ 摘　　要

NOVELTY - The electric heater has a casing (1) that is provided with an air inlet (11) at the bottom and an air outlet (12) at the top. A convection heating source is installed in the inner side of the bottom of the casing. A radiant heating source is installed on the inner side of the upper portion of the casing. A radiant heat outlet (13) is provided on the side wall of the casing corresponding to the radiant heat source. The convection heating source is a graphene heating module (2). The radiant heating source is an infrared radiation module (3). USE - Whole house electric heater for heating whole house. ADVANTAGE - The whole-house electric heater can take into account both short-range fast heating and whole-house heating, and can select a certain mode to be turned ON to realize short-range fast heating or whole-house heating such that the volume and weight of the heater can be greatly reduced. The radiation heat emitted by the radiation heating source can be reflected to the radiation structure through the reflecting baffle plate, and discharged from the radiation heat outlet by reflection such that the radiation range is increased, and the uniformity of the heat distribution in the room is improved. DESCRIPTION OF DRAWING(S) - The drawing shows the schematic diagram of the structure of the whole house electric heater. Casing (1) Graphene heating module (2) Infrared radiation module (3) Radiation structure (6) Reflecting baffle (7) Humidifying module (8) Air inlet (11) Air outlet (12) Radiation heat outlet (13) Air hole (61)