▎ 摘　　要

NOVELTY - Preparing environment-friendly antibacterial solid wood composite floor involves placing the grounded plate blank on the working table, then uniformly coating the adhesive on the two sides of the plate blank by the coating roller, then aging for 30 minutes, aligning the veneered solid board blank and sending into a hot press for preheating and pressing, preheating for 25 minutes, putting the glued solid board blank into the solution of the melamine resin for dipping, dipping for 20 minutes, dipping, putting the glued solid board blank into a hot press for three-section hot pressing, finishing the hot pressing, obtaining the glued solid wood board, taking out the glued solid wood board, cooling to the room temperature, putting the glued solid wood board into container filled with antibacterial emulsion for antibacterial treatment. USE - Method for preparing environment-friendly antibacterial solid wood composite floor. ADVANTAGE - The prepared wood composite floor has high environment-friendly performance, and little formaldehyde content, effectively reduces the small damage to human body, has good antibacterial, and is waterproof and wearable. DETAILED DESCRIPTION - Preparing environment-friendly antibacterial solid wood composite floor involves placing the grinded plate blank on the working table, then uniformly coating the adhesive on the two sides of the plate blank by the coating roller, then aging for 30 minutes, aligning the veneered solid board blank and sending into a hot press for preheating and pressing, preheating for 25 minutes, putting the glued solid board blank into the solution of the melamine resin for dipping, dipping for 20 minutes, dipping, putting the glued solid board blank into a hot press for three-section hot pressing, finishing the hot pressing, obtaining the glued solid wood board, taking out the glued solid wood board, cooling to the room temperature, putting the glued solid wood board into container filled with antibacterial emulsion for antibacterial treatment, soaking for 72 hours, taking out and drying, using the abrasive belt to sanding the surface of the glued solid wood board, then adhering the surface roller coating the laminated solid wood board to the primer, drying to 60-70% the state by UV. The adhesive solid board of the roller coating primer is roller coating with elastic wear-resistant primer, UV dried to 65% state, then roller waterproof primer on the wood floor roller coating the elastic wearable primer, UV dried to 70% state, the abrasive belt is used to sanding the surface of the glued solid wood board, mixed 5-8 pts. wt. color essence, 1.3-2.5 pts. wt. aqueous base material and the rest of water to prepare the pigment, then coloring the surface of the glued solid wood board along the wood grain direction of the pigment and UV dried to obtain product.