▎ 摘　　要

NOVELTY - The device has a base (1) whose bottom part provided with four corners. The four corners are fixedly connected with a supporting block (10). A top part of the base is fixedly connected with a fixing groove (9). The right side of the fixing groove is provided with a middle position of a guide port. The top part and the bottom part of an inner cavity of the guide port are fixed to a U-shaped plate. The inner cavities of the two U -shaped plates close to opposite sides are movably connected with a guide wheel. The bottom right side of inner cavity of the fixing groove is provided with a fixing seat. A bottom part of a driving motor (8) is meshed with a rotating rod (2). An output shaft of the driving motor is fixedly connected with a first rotating conical gear (6). The right side of the first rotating conical gear is fixedly connected with a first rotating shaft. The position of the top part groove near the middle position is fixedly connected with a side plate. USE - Device for processing lithium battery graphene pole piece used in lithium battery processing. Can also be used for lithium metal battery, lithium-ion battery, and rechargeable battery metal battery. ADVANTAGE - The device is convenient for cleaning and absorbing the dust on the surface of the pole piece, so it is convenient working staff subsequent processing at the same time, it can improve the processing and cutting effect. The device rotates rod, L-shaped limiting rod, moving rod, cutting knife through the first worm, the connecting plate and the third worm wheel are matched with each other, and the device drives the ball to continuously move up and down to knock the sieve plate to generate vibration, so as to accelerate the speed of the dust impurity filtering blanking, improving the effect of processing and the cutting. DESCRIPTION OF DRAWING(S) - The drawing shows a front sectional view of a device for processing lithium battery graphene pole piece. 1Base 2Rotating rod 3Dust suction pump 4Dust collecting box 5Belt 6First rotating conical gear 7Second rotating conical gear 8Driving motor 9Fixing groove 10Supporting block 11First worm wheel 12Second worm wheel 45Third worm wheel