▎ 摘　　要

NOVELTY - The machine has a dispersion cylinder (2) that is installed above a base (1). One end of a stirring shaft (11) is located inside the dispersion cylinder. Both sides of the upper surface of the base are provided with fixing seats (9). The dispersion cylinder is located between the two fixing seats and is connected with the fixing seats to slide up and down. A fixing frame (3) is installed above the fixing seat. A top seat (4) is installed above the fixing frame. A feeding port (5) is opened on one side of the upper surface of the dispersion cylinder. A discharge pipe (6) is installed at the bottom end of the dispersion cylinder. A first traction mechanism (13) and a second traction mechanism (14) are respectively located on both sides of the lower surface of the top seat. One end of the first traction mechanism and the second traction mechanism are respectively movably connected to both sides of the dispersion cylinder. USE - Dispersing machine for processing graphene. ADVANTAGE - The rotation of the rotating shaft is used to drive the rotating plate to rotate, so that the traction rod is used to push and pull the dispersing cylinder to slide up and down, by setting the first traction mechanism and the second traction mechanism, in the process of the stirring shaft rotating and stirring. The stirring shaft is fully contacted with the material at the inner bottom end of the dispersion cylinder, and the material at the inner bottom end of the dispersion cylinder is lifted up by the stirring shaft, so that the mixing effect is good, so that the graphene dispersion effect is good. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic view of the dispersing machine for processing graphene. Base (1) Dispersion cylinder (2) Fixing frame (3) Top seat (4) Feeding port (5) Discharge pipe (6) Discharging valve (7) Strut (8) Fixing seat (9) Buffer pad (10) Stirring shaft (11) Driving motor (12) First traction mechanism (13) Second traction mechanism (14)