▎ 摘 要
NOVELTY - Use of conductive ink in reducing the resistivity of a flexible electrode plate after multiple bending, where mode 1 comprises coating conductive ink on the flexible polar plate under the deformation state, sintering, and spraying solvent, or mode 2 comprises coating the flexible plate with conductive ink under the deformation state, repeating the following steps: sintering and spraying solvent. USE - Use of conductive ink in resistivity after reducing flexible pole plate after multiple bending. Uses include but are not limited to electronic newspaper (EP), curved display screen, wireless intelligent identification electronic tag (RFID), printed circuit board (PCB), solar panel (TFSB) and sensor. ADVANTAGE - The use of conductive ink in resistivity after reducing flexible pole plate after multiple bending is carried out in the air, the resistivity is only 1/10-1/4 of the traditional flat preparation and sintering treatment, and can be bent at high frequency. The conductive pattern prepared is suitable for various flexible conductive circuit, primary school, primary high school circuit demonstration experiment, printing electronic device or functional component, simple technique and low cost.