▎ 摘　　要

NOVELTY - The device has a flat bottom shell (3) whose one side is provided with a flat panel shell. One end of bottom of flat bottom shell is provided with a three-dimensional camera (1). The middle position of bottom of flat bottom shell is provided with a display screen, and the bottom of flat bottom shell far away from one end of the three-dimensional camera is provided with a touch panel. A three-dimensional camera connecting line (9) is connected with the three-dimensional camera. A bottom of a supporting rod (6) is provided with a base surface shell. One end of top part of base surface shell is provided with a key (8), and the bottom of base surface shell is provided with a base bottom shell. A loudspeaker is connected with a printed circuit board assembly (PCBA) main board through a wire. The manufacturing material of camera radiating fin is graphene. USE - Used as anti-dismantle structure of payment device. ADVANTAGE - The device: places the PCBA main board on the flat panel component and the base component at the same time when you want to achieve the effect of anti-disassembly; adds the conductive silica gel between the main board and the shell material to achieve the purpose of tamper-proof function, which requires two main boards and a main flexible printed circuit FPC circuit; improves the simplicity, convenience and stability of overall device assembly; and greatly saves device costs. DESCRIPTION OF DRAWING(S) - The drawing shows a main view of the anti-dismantle structure of payment device. Three-dimensional camera (1) Flat bottom shell (3) Supporting rod (6) Key (8) Three-dimensional camera connecting line (9)