▎ 摘　　要

NOVELTY - The method involves adding carbon material to water, adding metal salt after stirring, fully stirring and then standing and drying to obtain a dry sample. The dried sample is placed in a plasma device for processing to obtain the carbide material. The carbon material is added to the water and stirred into a paste. The standing time is provided as 11-20 hours. The drying temperature is provided as 100-140degreesC and the drying time is provided as 10-16 hours. The carbon material is provided with carbon nanotube, carbon microsphere, carbon fiber or graphene. The metal salt is provided with tungstate, molybdate, nickel salt or indium salt. The mass ratio of the metal salt to the carbon material is provided at (1.5-2.5):1 and the amount ratio of the carbon material to water is provided at 0.2g:(3-8) mL. USE - Method for preparing carbide material used in blood glucose monitoring device (all claimed) at low temperature by plasma one-step method for preparing glucose detection material. ADVANTAGE - The method is simple, environment-friendly, safe, reliable, and safe-friendly. The prepared carbide material is provided at small size, low cost, high stability, long service life, excellent electrochemical performance, and excellent glucose detection performance. The method not uses toxic organic solvent, dialysis device, and precursor preparation with simple technique, reliable and safety-friendly manner. DESCRIPTION OF DRAWING(S) - The drawing shows a graphical representation of an interference results of different substances when glucose measurement is performed after the electrode is made of the carbide material prepared by the plasma method.