▎ 摘　　要

NOVELTY - The shoe has a shoe main body provided with a vamp (2) and a sole (3). A bottom part of the sole is fixedly installed with a wearable bottom (4). The wearable bottom is connected with a ground phase contact. The wear-resistant bottom is fixed with a silica gel bottom (5) that is provided with an integrated module (6). The integrated module comprises a circuit board (7), a battery cabin and a signal receiver (9). A battery is provided in the battery cabin. A fixing plate (11) is fixed on an upper base of the silicon gel bottom. An insole (12) is provided on the fixing plate. The insole comprises a latex insole and a graphene metal cloth (14). The metal cloth is installed at the bottom of the rubber insole. An integrated module is electrically connected with the fixed plate. A negative electrode of the metal cloth of the graphene cloth is connected to the battery. USE - Internet of things low frequency pulse massage shoes. ADVANTAGE - The user adjusts the frequency of the vibration graphene the metal cloth by the mobile phone, so as to reach the function of massage, and the user can adjust the frequency. The user is allowed to adjust the vibration of the graphene metal cloth according to the requirement, and to greatly increase the experience feeling of the user. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic diagram of the whole structure of an internet of things low frequency pulse massage shoes. 4Wearable bottom 5Silica gel bottom 6Integrated module 7Circuit board 8Battery cabin 9Signal receiver 11Fixing plate 12Insole 13Latex insole 14Metal cloth graphene 17Nut 18Toe cap 19First shoe edge 22Shoelace through hole